Capt Jeff 0 Posted February 19 Report Share Posted February 19 I will be traveling with an R230 with the T-Top on the trailer and can't find specs on the height of the boat on the trailer. Does anyone know what type of clearance you need for an R230 on a trailer? Quote Link to post Share on other sites
Jersey Shore 0 Posted February 19 Report Share Posted February 19 On the Robalo facebook group someone posted a table of dimensions. It was pre R230 but showed R242 with tower at 11'4". They don't specify type of trailer so I am assuming it is the factory trailer. My R222EX is parked next to a basketball hoop and it is higher than the top of the backboard. With VHF antenna and anchor light. That puts it >12'6". One note my trailer is roller style. Not a Robalo. Quote Link to post Share on other sites
blue_storm 0 Posted February 21 Report Share Posted February 21 I have a 2021 R242 on Roller Load Rite Trailer. I measured it from the ground (after holding breath passing through first bridge on interstate) and recall to have been about 12 - 13 ft. Bunk trailer will likely be a little shorter than the roller trailer. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.