Grant

Members
  • Content count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Grant

  • Rank
    Newbie
  1. Wrex, does your outboard tilt fully out the water? Also, does your boat sit in the water slightly stern down, like mine? I am just trying to work out if that is what I should expect or if it needs adjusting / there is a problem with the weight distribution.
  2. It’s taken me a few goes to get the cover on in a reasonable time. Mine is one piece and remains a tight fit, but still more fiddling / learning required.
  3. Hi BA, Thanks again for the info. I think you are correct about the excess stern weight, and wonder if the fuel tank has shifted a little. Am in discussion with my dealer but am testing the theory by running the fuel tank down and seeing if that alters how she sits. I have also had a look at the photos of your cover. I noticed that it does not sit below the port stern rub rail. Is that intentional and if so, what holds it in place when you tighten the ratchet? I place mine below the rub rails but then have a lot of tension as it runs around the front of the outboard and also over the top of the ski pole.
  4. Biggie, I know this is an old post, but I have the same problem with my 2 month old R180. Only mine is the opposite; stern heavy which seems to be reducing as I empty the fuel tank. I think the fuel tank has moved. Did you ever solve the problem? cheers
  5. Ahh, the R200. I think that is the boat I would like. Thank you for your reply. Looking at yours, I think I need to reset the tilt to allow the engine to tilt further. Looks like a tight fit but at least it comes out the water. Do you have to turn the engine to stop the rigging hose from getting crushed? I also think the stern is too heavy, but can’t work out why that should be. Bilge is empty and no kit on the boat. My dealer is contacting Robalo. The cover is also a really tight fit; only just makes it and ski pole is already rubbing through. Will need a patch to reinforce.
  6. Hi, Got my 2018 R180 with a Yamaha 150 a few weeks ago. Most things good, however, the outboard will not tilt completely out the water. I have a ski pole, and at full tilt, it stops a couple of cm short. The rigging hose also seems to be in issue such that any further tilt looks like it will crush it. Has anyone else experienced this?
  7. Did you every get around to doing this? I have just taken delivery of my R180 - all great, but ridiculous position of battery switch.